Prodipe 49 C Betriebsanweisung PDF herunterladen (Seite 11)

System Message Window style E.g. Cakewalk :

From 49 C / 25 C to computer (UPLOAD

) :

(Operate 49 C / 25 C in the same way as under Record Style, only different operation in

sequencer software.)

1) Use USB cable to connect computer and 49 C / 25 C.

2) Set 49 C / 25 C parameters.

3) Open a new MIDI project in Cakewalk.

4) Select 49 C / 25 C as MIDI input and neglect output.

5) Open system message window: VIEW->SYSX; select a BANK and press the down

arrow; select YOU START DUMP ON INSTRUMENT and then Cakewalk enters into

system message receive mode.

6) Press EDIT button to enter keyboard multi-function mode, and then press UPLOAD,

49 C / 25 C enters into system message upload mode. LED displays SEu. After

upload completes, LED displays don.

7) Use SAVE in Cakewalk to save received message in *.SYS format.

System Message Window style E.g. Cakewalk:

From computer to 49 C / 25 C (DOWNLOAD

1) Use USB cable to connect computer and 49 C/ 25 C.

2) Open a new MIDI project in Cakewalk.

3) Select 49 C / 25 C as MIDI output

4) Open system message window: VIEW->SYSX; select a BANK and import saved system

message file.

5) Press EDIT button to enter keyboard multi-function mode, and then press

DOWNLOAD, 49 C / 25 C enters into system message download mode. LED displays

SEd.

6) Use Cakewalk system message send function to send system message to 49 C/ 25 C.

7) LED displays don after 49 C / 25 C finishes receiving correct system message.

8) System starts SNAP SHOT function to transmit download setting message to sequent

device.

Pedal polarity (49 C only)

9 System can recognize or change pedal polarity. If you want pedal to transmit PEDAL

ON message while pressing the pedal and PEDAL OFF message while releasing the

pedal, you do not need to do any adjustment. Otherwise, you can press down the

pedal while switching on this unit and release the pedal after the unit is turned on.

9 Press EDIT button to enter keyboard multi-function mode, and press PEDAL A

POLARITY or PEDAL B POLARITY to adjust pedal polarity.

Switch dial function groups

9 Press SWITCH to shift dial function group between R1~R4 or R5~R8.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

Keine Kommentare

Prodipe 49 C Betriebsanweisung Seite 11